1. Different plans:
One: Track lights are generally cylindrical, with the equipment exposed.
Two: Powergear Track Spot Light Rail are generally embedded devices.
2. The illumination plan is different
China Magnetic Suction Track Light have sliding rails, which can be moved within a certain plan.
LED track spotlights are embedded devices, which are less flexible than track lights.
3. The rotation angle of the lamp holder is different:
The track light can adjust the angle in two planes, generally 360° horizontally and 180° vertical.
China Rotatable Magnet Track Spot Light can only adjust the angle in one plane, and the angle planning is generally between ±45° in the longitudinal direction.
Maintenance method of LED track light:
1. Minimize the switch of
Led track lights. During cleaning and maintenance, you should be careful not to change the structure of the lamp, and do not randomly replace some parts in the led track lamp.
2. Replace the aging lamp tube in time according to the light source parameters supplied by the sign. If the two ends of the lamp tube are red, the lamp tube is black or dark, or the lamp does not light up, the lamp tube of the led track light should be replaced in time to avoid Present unsafe phenomena such as ballast burnout.
3. After the cleaning and maintenance are completed, the lamp should be installed as it is, and do not miss or wrongly install the lamp parts.
Previous: The development experience and use process of China Kitchen Magnet Track Lighting
Next: The sliding connection structure between the China LED Track Light Driver Box and the rail light is also very complicated
Mr. TonyLiang