Installation method of Magnet Spot Light

Installation method of Magnet Spot Light

1. Preparatory work
Turn off the power supply and check all parts and tools for the installation of Magnet Spot Light. The installation of Magnet Spot Light includes track, lamp holder installed on track, lamp cap fixed on lamp holder and lamp installed in lamp cap. Two conductive sheets are arranged at the top of the track, a long groove is arranged at the bottom of the track, and the tools include electric pen, measuring instrument, tape, etc.
2. Install the transformer
The Magnet Spot Light must be equipped with a transformer. The transformer can effectively prevent the frequent use and explosion of the track spotlight, which is convenient for the safety of daily use.
3. Installation of lamps and lamp racks
Operate according to the installation requirements of the track spotlight design, do not exceed the marked height, fix the track frame, then install the track spotlight, thread and fix the bolts, install the lamp cap on the lamp holder, and adjust the irradiation angle and direction of the spotlight. The elevation angle of the Magnet Spot Light installed in rows shall be consistent and arranged neatly, In this way, the lighting effect of the spotlight is more beautiful.
4. Inspection and test
After the installation of the Magnet Spot Light is completed, power on the track spotlight, turn on the switch, observe whether the Magnet Spot Light can work normally, and adjust the irradiation angle of the Magnet Spot Light.